Pages

Showing posts with label Tutorial. Show all posts
Showing posts with label Tutorial. Show all posts

Tuesday, July 24, 2012

Let them eat cake

I have recently begun an obsession with baking. Not that my hips are thanking me... maybe they are, it being winter and them needing some extra coverage?  I dug out a cupcake recipe book, that I've had for ages and never used, a while back and decided I wanted to make something grand. Not a regular ole chocolate or vanilla cupcake but something special. You know, something that makes other people go green with jealousy because they just wish they could bake as fantastically well as you. You know, because that's what happens when you make something unusual, people think you're some sort of genius or something...

So I found two recipes, the second one hubby is not too fond of as it contains a pet food hate for him. Mention the word Carrot and he literally goes orange at the thought of putting it in his mouth.

I do still want to make the carrot cake cupcakes, but I have had too many other things on my proverbial plate to make them since I made the cupcakes being showcased today.

They're called Ruby Red cupcakes, why they're called ruby red, I have no idea, because I put about half a bottle of red food colouring in (recipe called for only a teaspoon - 5ml's) and it still looked like chocolate! Not very fancy if you ask me.

Step One: Creaming the butter, sugar and vanilla essence



Step Two: Sifting together the dry ingredients




Step Three: I had a really HUGE fail moment and my Electric mixer died on me. RIP

Step Four: Mix dry and wet ingredients together, add buttermilk and red food colouring.

Step Five: Place cupcake wrappers in baking tins (or in my case, silicone 'tins') and fill halfway with cupcake mix.


Step Six: Watch very closely while in oven, allowing mouth to salivate and drool onto floor. This creates anticipation for the baked goodness to come.


Step Seven: Repeat cupcake baking until all the mixture is used, I ended up with 36 chocolate looking goodies.


Step Eight: Cool cupcakes, make red pink icing (I need help in the food colouring department)


Step Nine: Ice Cupcakes and place in airtight containers to keep fresh until devoured.


Step Ten:



XOXO

Monday, May 28, 2012

Gigantasaurus cuttlebug embossing tutorial

Although I didn't post this on Friday evening, here it is as promised. An embossing tutorial for a large area, using a cuttlebug embossing folder.

First off, let me start by showing you a little paper saving tip that I have been utilising since Lara Hanna taught it to me many, many, many moons ago.

I started the layout by choosing my paper, and layering in such a way that I knew how much space I would need as a border on my Pink cardstock. I marked each corner, so I could see where to cut my lines.



I use a Stanley/carpet knife when I craft, it is so much cheaper than the gimmicky craft knives out there, and I find the blades are sturdier. I have never liked a paper trimmer much, but by all means use it if that's what you are more comfortable with.

I cut along all the lines and my sheet looked like this:


Logically, the next step is to remove the inner square that has been cut out.


The outer square is the part that i embossed using a cuttelbug folder. Bear in mind that this is a full 12x12 inch sheet and would never fit in my cuttlebug. So, using the cuttlebug was out of the question.

I desperately wanted to add some embossing to the pink sheet, because I felt it needed some depth. Amazing what you think of when your eyes roam your craft space. I picked up my hammer, that has a rounded ball on the back of the head and an embossing folder and went on a mad embossing challenge.



I am sure your hammer looks the same, I got mine in a setter kit so it's a pretty standard crafting hammer. I placed the paper between the folds of the embossing folder in stages and 'rolled', quite hard, with the back of the hammer down onto the embossing folder. This left the embossed impression quite nicely. See below for a picturesque explanation :)



The finished product is on my last post, but here a close up of the finished product:


I hope this helps you in your own crafty quest for scrapbooking and card making greatness, I would love to see your finished products!

Until my next post*

xoxo

Tuesday, September 6, 2011

Tutorial Tuesday - Felt flowers

Please don't get too excited by the title post, I really did only make very basic felt flowers. Nothing that is going to blow your mind or make you say WoW! But sometimes, it's the simplest things that make your projects WoW and I'm hoping these flowers will do that for me :)

On to the recipe list!



- Felt sheets in various colours
- Scrap pattern paper
- Die cut flowers (you could also hand draw)
- buttons/brads
- thread

Tools:



- Scissors
- needle
- Marker

I do suppose that if you had a die for a cuttlebug or Big shot or something else like them, you could cut your flowers with much more ease. I have done this the 'old fashioned' way, which allows for those of you who do not have these dies and machines, to learn how to make crafting accessories without too much fan fare.

I started out by choosing three different sized chipboard flowers and tracing them onto my chosen felt and scrap paper with a felt tipped pen. I do think a sewing pen or pencil would work better but for lack of one I had to make a plan.

     

I then put the chipboard flowers to one side and cut the traced flowers out of the felt and paper. I then layered the cut pieces on top of one another in the order that I wanted the flower to look.

    

I then took a needle, some thread, and a button from my stash and sewed the stack together. I also made another variation of this flower, by only using felt and stitching around the edges of the top layer to add a bit more oomph :)

    

Remember last week's tin? Well, how do you like it now? filled with flowers for future projects!


Hope you're inspired to dig into your stash and make your own flower embellies. Remember, you don't have to use felt to make them Pop! Use up some of your paper scraps! Have a stunning day everybody :) Tomorrow brings another Week in review LO!

xoxo

Tuesday, August 30, 2011

Tutorial Tuesday - An altered Tin

I know this has been done countless times by many crafters, but I just had to jump on the bandwagon :) An empty tin just has so much potential to become a beautiful storage item.

When we finished a tin of coffee, I decided to swipe the empty storage unit and turn it into a storage tin for my felt flowers (of which I still have to make...more on this another day though). Here is a before and after of the actual tin, with and without it's coffee label.


Perfect for storage, no? so, here is the list of supplies you will need to follow my tutorial:

1 x Tin (label removed, inside washed clean and dried)
Pattern Paper (enough to go around the whole tin, and the top of the lid)
Cardstock (contrasting colour)
Ribbon ( I used two different kinds)
embellishments (I included, flowers, feathers and bling on my project)



I originally thought I was going to add some embossing to this project, that is why the cuttlebug is featured in the above photo. I decided against it in the end. The felt and chipboard flowers were used to make felt Flowers...more on this in next week's Tuesday tutorial.

Tools:
Craft knife/Cutting cool
Craft scissors
Double sided tape
Scalloped ruler/template or punch
Pencil
Circle cutter

Ok, so now that you have all your stuff, the first thing you need to do is measure the height of the tin, between the inner edges. This will determine the height of your pattern paper needed. Cut your paper to size. Run double sided tape around the tin. I ran about five lines of tape to ensure that the paper would stick flush. Adhere the paper. Now take your cardstock piece (must be long enough to fit around the tin) and trace and cut, or punch a scalloped line along one of the horizontal edges.

     

Adhere the scalloped strip, scallops facing down, to the top edge of your tin. Now adhere ribbon to the centre line of your scallop strip, using double sided tape. I also adhered a thick lace ribbon to the bottom edge of my tin, making sure I hid the silver ridges of the bottom edge.

     

I then followed by adding a ruffled ribbon over the lace, I am too girly for words ok :) Next up is the lid. The lid of this particular tin is plastic and had ridges on it. It was somewhat difficult for me to cover but I got it right. Hopefully your lids will be flush and flat. Start by measuring the size circle you need to cover the lid. Cut the circle needed. Apply double sided tape to the lid. Adhere the circle. Embellish to your hearts content.

     

I added a few more embellishments to my tin after this, to tie in the elaborate flowers and feather work on the lid.

                              

The finished storage tin now looks like this:

      

I quite enjoyed myself when I put this together and it really was one of the quickest projects I have attempted in a while. I find decorating 3d items much easier than cards and scrapbook pages... go figure!
So, hope you find the tutorial interesting and of some help. Send me a link to your altered item if this inspired you :) I'd love to see your take on it. Until tomorrow, have a stunner of a Tuesday!

EDIT
I just so happened to pop by the Top tip Tuesday blog and they have a shabby chic challenge going. I thought I might just enter :) I also have a shabby chic tip to offer up.
When trying to achieve the shabby look, always over ink. It ages your pages/projects and gives more dimension to the overall effect.

xoxo

Friday, August 19, 2011

Tag, you're it! + a Tutorial!

Unbenownst to Claire (see comment on yesterday's post), I already had today's post planned out. So I will not be posting Week 20 of my year in review today. That can wait until Tuesday...after I've posted my two easy peasy Tutorials. ok? ok.

So I saw this idea a long time ago on Kazan Clark's blog called Nunu toolies. I do not remember which post, but I remembered the gist of the project. When I saw these at the Crazy Store for only ten rand, a really cheap store here in SA where you can buy all sorts of crazy stuff, I couldn't resist.



Don't you think this is a clever way to 'mark' glasses at a function? Each person will know which glass is theirs because they have a unique tag attached to them. Granted I could have left these as they were bought, but being a crafter, I had to make it my own.

First things first, get all your supplies together:
1 x pack glass charms
1 x scrap cardstock
1 x contrasting scrap cardstock for the base of the charm (pattern will work well here I think, though I did not use it)
beads in a matching or contrasting colour
Scrap Ribbon
Embellishments



Tools:
Cuttlebug
Swiss dots cuttlebug folder
Circle punch
Ruler
Craft knife/paper trimmer
Pliers
Craft scissores, plain and pattern

Start by removing one of the charms from the package. Open the clasp to release the hold. You will notice that the bend in the end of the clasp, prevents you from removing the beads and charm that the manufacturers have put on. Take your pliers and bend this piece ever so slightly until you are able to remove the beads and charm. Be careful not to break the wire. Now, slip on the first half of your selected beads and put the loop aside.


Take the first piece of scrap paper and using a small circle punch, punch out a circle. Run the circle through your cuttlebug in the swiss dots folder and ink all edges. Note, I asked my trusty craft assistant to help me with my cuttlebug procedure. Thanks Honey!

                               



Now place the circle onto your base scrap piece. Measuring a good border around the circle, cut a square from the base paper. Do not adhere the circle to this piece just yet. Take a pair of pattern cutting scissor and cut along one of the edges to make a pretty border. Run it through the cuttlebug and ink all edges.

    

Go back to your embossed circle, turn it over and stick a piece of folded ribbon to the back, letting a piece overhang. Stick this down onto the base piece. Embellish as desired.

    

Pierce a hole with your paper piercer in one corner of the completed tag, thread the wire loop through this, following with the rest of your chosen beads. Take your pliers and bend the end of the loop back to it's original position.

     

Your glass marker is now complete and ready to be used! wrap the loop around the stem of a wine glass and close the clasp.


You're ready to party!


There is more to this tutorial, we will be adding another embellishment to the glass. It would look really lovely at a table setting. So, join me on Monday to find out what I made! Until then, have a Blessed Weekend! Happy Friday!

xoxo